unitedfbody.com

« previous next »
Pages: [1]   Go Down

Author Topic: 75 400  (Read 1433 times)

0 Members and 1 Guest are viewing this topic.

Offline firedan

  • Burd's Gold Club Member
  • UFB Vendor
  • *
  • Posts: 1889
  • KARMA +38/-15
  • Gender: Male
  • DEVILMAN
    • FireDan's 2nd Gen Parts
75 400
« on: November 26, 2012, 04:05:49 PM »
i found a 1975 400 with 6X 4 heads that is complete except the timing chain cover guy want $200 is it worth it? it did run he just sold the cover. thank all...
Logged

Offline Mongo

  • VIP Member 🇺🇸 UFB Supporter
  • Tech staff/Moderator
  • *
  • Posts: 10969
  • KARMA +156/-355
  • Gender: Male
  • T16
Re: 75 400
« Reply #1 on: November 26, 2012, 04:06:41 PM »
I would say yes!
Logged
In Front UFB member............Are you?

Offline richduty455

  • Burd's Gold Club, Super Duty 455 Member 🇺🇸
  • Diamond Member
  • *
  • Posts: 5690
  • KARMA +27/-34
  • Gender: Male
  • Too much bed, not enough sleep
Re: 75 400
« Reply #2 on: November 26, 2012, 04:16:17 PM »
yea def
Logged

Offline firedan

  • Burd's Gold Club Member
  • UFB Vendor
  • *
  • Posts: 1889
  • KARMA +38/-15
  • Gender: Male
  • DEVILMAN
    • FireDan's 2nd Gen Parts
Re: 75 400
« Reply #3 on: November 26, 2012, 06:52:57 PM »
darn posted on camaro again but any way i thought decent deal to. what is the difference in 6X 4 and 6X 8 heads
Logged

Offline b_hill_86

  • VIP member 🇺🇸
  • Detroit Birds
  • *
  • Posts: 2924
  • KARMA +19/-3
  • Gender: Male
  • Toledo, OH
Re: 75 400
« Reply #4 on: November 26, 2012, 08:43:26 PM »
Quote from: firedan on November 26, 2012, 06:52:57 PM
darn posted on camaro again but any way i thought decent deal to. what is the difference in 6X 4 and 6X 8 heads

I think it's just the combustion chamber size = different static compression ratio. Should have the same 2.11 intake/1.66 exhaust valves.  I forget what the range is though 6x8 something like 100-120 or something and the 4s are high 80s to low 90s. Although my 4s cc'd at 97ccs so it can vary a little I think.
« Last Edit: November 26, 2012, 08:44:58 PM by b_hill_86 »
Logged
-Brian-

1977 Trans Am 400 4 Speed Hardtop

Offline atomic78

  • VIP member
  • platinum Member
  • *
  • Posts: 1300
  • KARMA +6/-2
Re: 75 400
« Reply #5 on: November 26, 2012, 11:27:30 PM »
Good deal fo sho. The 4's have like 4cc less.
Logged

Offline xtopfuel

  • VIP Member
  • Moderator/Tech Staff
  • *
  • Posts: 19195
  • KARMA +249/-271
  • Gender: Male
  • AA/FUEL DIGGERS
Re: 75 400
« Reply #6 on: November 27, 2012, 06:22:53 AM »
good deal, kind of strange he sold the timing cover, i would look at it close
Logged
1979 WS6 Nocturne Blue
1980 SE WS6 (current project)
69 Firebird prostreet
1968 Chevelle
1971 Monte Carlo (current project)

Offline firedan

  • Burd's Gold Club Member
  • UFB Vendor
  • *
  • Posts: 1889
  • KARMA +38/-15
  • Gender: Male
  • DEVILMAN
    • FireDan's 2nd Gen Parts
Re: 75 400
« Reply #7 on: November 27, 2012, 09:24:47 AM »
i looked real close at it and it is a clean engine it is sitting in a 75 safarie wagone that the wrecked so now he selling parts. was great running car with only 72k on and he is the orig owner. so its well worth the buy is the feeling i am getting. i have a 455 out of 73 wagon that i was going to build an play around with but im reading that 400 are much stronger to build...
Logged

Offline smith79

  • Detroit Birds 🇺🇸
  • Moderator
  • *
  • Posts: 7124
  • KARMA +86/-212
  • Going to Dave's Bar
Re: 75 400
« Reply #8 on: November 27, 2012, 09:28:08 AM »
if you dont buy it, I will.  Wheres it at?
Logged

Offline 2ndchildhood

  • FLC
  • *
  • Posts: 1220
  • KARMA +4/-1
Re: 75 400
« Reply #9 on: November 28, 2012, 05:50:48 PM »
You should read a little more carefully, it's in a 75 station wagon......LOL
Logged
Pages: [1]   Go Up
« previous next »